The TJ goes Android: The dash gets modded.

Update time! I needed to get the Nook mount in place, and modify the center bezel. I had a lot of options when it came to mounting, but I wanted to keep it simple, and by default reliable. If it won’t take abuse, it’s not worth putting in a Jeep. So, I decided to utilize my existing Quadratec iVault. It has served me well for the past year or so, and now it was getting a few more holes… The idea was to eventually make a storage compartment behind the face, and use the face itself to hold the RAM mount. Now, I do realize that nothing is ever truly safe in a Jeep, but there are times I need to stash something quickly while running in to a store. The Nook itself would likely get put in there.

So, let’s start with the mods. Due to the mounting points in the RAM, I needed to move the existing iVault lock to the left. I drilled a hole, and shaped it with my Dremel. This was the result.

Now I needed to make a few holes for the RAM mount.

Now finally the mount and iVault face are bolted together.

It was time for a test fit. As you can see, it attaches nicely. Now one could argue about the aesthetics of it’s spacing away from the the bezel as it is, but it works well for me. It’s within easy reach, and most importantly, nothing is blocked. That was a priority here. I’ve seen installs where the vents are unusable, or the HVAC controls are inaccessible. That may technically work, but I couldn’t live with it. There was no way I wanted to sacrifice any function just to do something cool. That’s also the reason the Nook isn’t more tightly integrated into the bezel. It needs to be easily removable, and make for easy maintenance should it be needed.

Now, let’s take a look at the Hifonics EQ. It’s very easy to use in this location, but I’m not sure the pic is doing it justice. I have to do something about the gap above it though. I can’t just shove a fill plate in there and call it good. I’ve got to fix it the right way. You can see the hole I added for access to the iVault lock.

So, it was time to do a little cutting. I’ve got everything marked out and ready for the Dremel.

After the cuts…

Let’s clamp that piece in place…

I cut a piece of plexi to fit behind the hole, and epoxied it in place. Once the epoxy cures, it will get smoothed out with a fiberglass reinforced Bondo.

After a few light layers of Bondo and subsequent sanding, I gave it a quick shot of primer. Here you can see the fresh primer still in the process of drying. A few more coats and it will be like glass. I dare you to say it doesn’t look completely OEM.

The last thing I did was reassemble everything to triple check fitment. It all looks good, so it’s on to mounting the EQ solidly, and getting a fill plate made for the HVAC. Then it’s painting and final assembly!