Project: OSIDIAS - The interior assembly gets fiber!
By · CommentsUpdate time! I actually livestreamed the fiber going down, although it was a huge pain. For some reason I thought it was a good idea to skip taping the edges of the fiber. Needless to say those stray fibers soon became a problem as the layers went down. I managed to keep them out of the way, and got 5 layers on before I ran out of resin. That means I’m a layer short of what I wanted to be. Although looking at the finished assembly, it’s likely thick enough, but I’m going to give it one more anyway. I had a little trouble sliding the outer mold in place. The resin kept sticking to the mold and pulling it down with it. Doh, why didn’t I wrap plastic around it before the mold?! That would have taken care of the problem, and I’d be done. As it is, now I’ve got to sand and add the last layer anyway. Mostly for cosmetic reasons mind you. The outer mold caused some wavy weaves because of the sticky resin… and I just can’t have that. I’m out of resin though, and will have to order more before continuing.
Well, enough of that. On to the pics! Here I’m using a template to cut out the layers of CF.
Project: OSIDIAS - The interior mold continued…
By · CommentsAlthough Project Hutch has been getting most of my time lately, I was able to get a little work done on OSIDIAS while waiting for some JB Weld to dry… I picked up on the continuation of the molds for the interior assembly. When I last updated, I had the inner mold completed. Now it was a matter of laying out and cutting the exterior. What you see here is another 1′x4′ piece of aluminum sheet.
Project: Hutch - The reservoir gets a revision
By · CommentsOkay everyone, how about a real update? In fact, how many of you even completely forgot about this project? Haha, well, I’m going to remedy that. When I last left off, I had the reservoir finished, and was ready to move on to other minutia. Between that time and now, I decided to slightly modify the reservoir and build a new one with the help of my Romaxx CNC machine. Check out the cutting of the bottom layer here.
With the bottom layer cut, I had to tap a couple of holes for G 1/4 Bitspower fittings. To simplify the process I put the tap in my drill press, and manually turn to tap. It keeps the tap completely vertical, and allows for precise cutting.
